UFO-Detect - The Portable Detector

Help and support information for your device.

Overview

The UFO-Detect is a battery-powered, completely portable anomaly detector designed for field use, camping, and skywatching away from home. A fresh set of batteries will power the unit continuously for a few days.

Note: Unlike our home unit, the UFO-Detect does not connect to Wi-Fi. For full-time, automated home monitoring with automatic network alerts, we recommend our plug-in UFO-Sense unit.


Powering On/Off & Testing

Your UFO-Detect uses a specialized magnet key instead of a traditional mechanical switch:


Proper Placement & Operating Conditions

Because the UFO-Detect continuously measures subtle shifts in magnetic and gravitational fields, proper placement is critical for accurate operation:


What Happens During an Alert

If the UFO-Detect senses a significant anomaly in the Earth's magnetic field or gravitational field, the unit will begin beeping continuously for up to a minute.

IMPORTANT: Because UFO-Detect operates offline without a Wi-Fi connection, it cannot send automatic alerts on its own. When an alert occurs:

  1. Look up and check the sky! Grab your phone or camera to capture photos or video if anything unusual is visible.
  2. File a manual report right away at https://report.UFO-Track.com so that other UFO-Track members in your area can be notified immediately.

You can also check the live network map at https://sightings.ufo-track.com to see if other detectors or witnesses nearby recorded an event at the same time.

Join the Network: Please consider becoming a $5/month paid member (which helps cover texting, server, and other overhead costs). As a member, you will receive real-time text alerts on your phone whenever other members or devices in your area report an anomaly. Go to https://UFO-Track.com to join this citizen-science project. Teamwork and technology can help us all move closer to Disclosure!


Changing the Batteries

The UFO-Detect runs on three AA batteries. When it is time to replace them, follow these steps:

  1. Open the Case: The two outer halves of the unit snap together. Carefully pry the top and bottom halves apart.
  2. Replace the Batteries: Slide the lid off the internal battery compartment. Insert three fresh AA batteries, paying close attention to the correct polarity (+ and - markings), and slide the compartment lid back on.
  3. Snap Together Carefully: Before snapping the two outer case halves back together, notice the two small indentations along the edge of each half. Route the internal USB cable directly through the spot where those two small indentations line up together so the wire is not pinched, then firmly snap the case shut.

Questions or Need Help?

If you have any questions about setting up or using your UFO-Detect unit, please contact us at UFO-Track via admin@UFO-Track.com or visit our main website at UFO-Track.com.